Chimney Repair in San Angelo - You See the Footage Before You Get a Price

Trusted Chimney Repair for San Angelo Homeowners

Most chimney repair in San Angelo starts with something a homeowner already noticed but couldn’t name: a stain spreading on the ceiling near the flue, a cap that walked off in a windstorm, mortar crumbling at the crown, or a fireplace that smokes back into the room. Chimney repair is the work of finding the actual cause and fixing it with materials built for the job, not patching over the symptom. Our technicians have up to 11 years of experience, and we work with professional-grade products like DuraFlex, HeatShield, and Copperfield rather than hardware-store substitutes. Same-day repair is often possible when you call early. Reach us at (833) 946-3155.

Call (833) 946-3155

Chimney Cap Installation

Chimney cap installation is the fitting of a protective cover over the flue opening to keep rain, birds, and debris out while letting smoke and gases escape. You need one when the flue is open to the sky, when an old cap has rusted through, or when a new liner goes in and the existing cap no longer fits the opening. We supply and fit caps in Gelco, Olympia Chimney, and Copperfield so the sizing matches the actual flue profile instead of a generic one-size cover. Chimney Sweep San Angelo carries the right cap for the job rather than a single house brand. Typical cap installation runs $150-$450 depending on the flue count and the cap style, with the written estimate setting the final price.

Single-Flue and Multi-Flue Setups

A single-flue chimney takes a straightforward cap, while a chimney serving two flues may need a custom or multi-port cover so each opening is protected. We measure the actual crown footprint before ordering, since a cap that sits too loose rattles and one that sits too tight traps moisture.

Stainless and Painted Steel Options

Stainless caps hold up longer against weather, while painted steel costs less up front. We walk you through both so you can weigh budget against the replacement interval you’d prefer.

Chimney Cap Replacement

Chimney cap replacement is removing a damaged or missing cap and fitting a new one sized for your flue, and it’s needed when the old cap is rusted, bent, or entirely gone after a storm. A missing cap lets water straight into the flue, which is where a lot of interior staining and masonry damage begins. Replacement also makes sense when you’ve just had a new liner installed and the old cap can’t accommodate the new flue size. We fit caps from Gelco, Olympia Chimney, and Famco to match the chimney profile. Chimney cap replacement in San Angelo typically runs $175-$500 depending on cap type, flue count, and how much of the old hardware needs removing. The written estimate sets the final price.

Matching the Cap to the Crown

A replacement cap has to sit flush and seal against the crown, or it just creates a new leak point. We check the crown surface first and note any repair needed before the cap goes on.

When a Repair Is Enough

Sometimes the cap is fine and only a loose bolt or a damaged screen needs attention. We tell you that plainly when it’s true and skip the replacement.

Chimney Liner Installation

Chimney liner installation is placing a new flue liner inside the chimney to contain heat, gases, and creosote, and it becomes necessary when the existing liner is cracked, deteriorated, or missing entirely. A failed liner is a serious safety issue: heat and carbon monoxide can reach the framing around the chimney. We install DuraFlex flexible liner systems, the same brand specified by professional chimney sweeps across the country, sized to the appliance, whether it’s a wood fireplace, gas insert, or another fuel type. We can also tell you when HeatShield flue resurfacing is a cost-conscious alternative to full replacement. Liner installation in San Angelo typically runs $2,200-$5,500 depending on liner type, flue length, and appliance requirements. The written estimate sets the final price.

Insulated vs. Uninsulated Liners

Insulated liners suit wood-burning appliances where flue temperatures run higher, while some gas setups can use an uninsulated liner. We match the liner type to your fuel and appliance.

When Resurfacing Beats Replacement

If the flue interior has deteriorated mortar joints but the structure is otherwise sound, HeatShield resurfacing may restore the liner at a lower cost. We show you the camera evidence before recommending either path.

Chimney Flashing Repair

Chimney flashing repair reseals the metal transition between the chimney and the roof, the joint where water most commonly gets in. You need it when you see water stains on the ceiling or chimney sides, when flashing is pulling away, or when the roof has been replaced without the flashing being redone. We remove the old flashing, clean the joint, and fit new metal with proper step and counter-flashing so water sheds away from the chimney rather than working under it. Chimney flashing repair in San Angelo typically runs $300-$900 depending on roof pitch, chimney size, and how much old material has to come off. The written estimate sets the final price. On the roof, this is height work best left to trained professionals.

Leaks That Aren’t the Flashing

Not every stain near a chimney comes from the flashing; the crown and cap can leak too. We check all three before quoting so we’re fixing the right thing.

Metal Types and Longevity

Flashing is only as good as its metal. We choose a metal suited to the roof material so it doesn’t corrode against it or pull loose at the seams.

Chimney Crown Repair

Chimney crown repair fixes the concrete cap that tops the chimney structure and sheds water away from the masonry below. You need it when the crown is cracked, crumbling, or pulling away, since water that sits on the crown finds its way into the flue and the house. We remove the failed crown material and rebuild or re-coat the crown with a proper slope so it drains instead of pooling. Chimney crown repair in San Angelo typically runs $350-$1,100 depending on crown size and whether the whole crown is replaced or re-coated. The written estimate sets the final price. If the crown is only lightly cracked, we tell you that and say the repair can safely wait.

Rebuild vs. Resurface

A crown with small surface cracks usually just needs resurfacing, while a crown that has separated from the flue needs rebuilding. We assess which level of work your crown actually needs.

Why the Slope Matters

A flat or back-pitched crown holds water right where the flue meets the top. We build the new crown with the pitch needed to move water off the surface.

Chimney Repair Companies

Chimney repair companies do the inspection, diagnosis, and structural fixes a basic sweep visit doesn’t cover, and they matter when you have a leak, a damaged crown, or a failed liner. Choosing among chimney repair companies comes down to whether they carry real materials and can show you evidence of the problem, not just quote a repair. Chimney Sweep San Angelo works with an intentional portfolio of industry brands, including DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, so you’re not getting generic substitutes. Repair work in San Angelo ranges widely depending on the job, from flashing at $300-$900 to full liner installation at $2,200-$5,500, with the written estimate setting the final price.

What to Ask Before You Hire

Ask what materials the repair uses, whether a camera inspection is included, and whether you’ll see the photos. A company confident in its work answers all three without hesitation.

Reading the Written Estimate

A good estimate itemizes what’s being repaired and with what. Vague lump-sum quotes are worth pushing back on before you agree to anything.

Chimney Masonry Repair

Chimney masonry repair restores the brick and mortar that hold the chimney together, from repointing joints to rebuilding damaged sections. You need it when mortar is crumbling out of the joints, bricks are spalling or loose, or the chimney leans or has visible gaps. We remove the failed mortar, pack in new material, and set any loose brick so the chimney stays sound. Chimney masonry repair in San Angelo typically runs $500-$3,000 or more depending on how much of the stack is affected and whether repointing or rebuilding is required. The written estimate sets the final price. Tuckpointing a few joints is a modest job; a rebuild is not, and we tell you which you’re looking at.

Repointing Before Rebuilding

Repointing replaces failed mortar without touching the brick, and it handles a lot of chimneys that look worse than they are. It’s the first thing we check for.

Reading Brick Damage

Spalled brick faces and loose units point to moisture, not just age. We trace the cause before we repair so the new work holds.

Brands We Service

We work with DuraFlex liner systems and know where they wear or fail: the joints, the cap connection, and any spot where the liner isn’t properly supported. Our liner installations use DuraFlex flexible liners sized to the appliance. We also use HeatShield flue resurfacing compound for restoring damaged flue interiors without a full liner replacement, which suits chimneys with deteriorating mortar joints rather than structural failure.

We supply and fit Gelco and Olympia Chimney caps to match the chimney profile, along with Copperfield and Famco covers when sizing calls for it. We’re not a dealer for any of these brands, and we don’t claim to stock OEM parts. What we do is carry professional-grade products and stand behind the installation. Whether you have Gelco, Olympia Chimney, DuraFlex, or any other make, we can help.

Signs You Need a Pro Right Now

• Water stains on the ceiling or chimney sides. Staining points to a leak somewhere at the crown, flashing, or cap, and the faster it’s traced the less masonry it takes with it.
• Crumbling mortar or loose brick. Failed mortar lets water into the masonry and can lead to spalling and structural movement if it’s left alone.
• A strong smoky odor when the fireplace isn’t in use. This usually means creosote and moisture are sitting in the flue, and a sweep and inspection should come before the next fire.
• A damaged or missing chimney cap. An open flue is an open door for rain, birds, and debris, and it’s an easy fix once it’s caught.
• A cracked or pulled-away liner. A compromised liner is a safety issue, not a cosmetic one, because heat and gases can escape into the structure around it.

Our Process, Step by Step

1. 1
   Book the visit and scope the problem. We find out what you’re seeing and set a time that works. If the issue is urgent, same-day repair is often possible when you call early. Call (833) 946-3155. We answer 24/7.
2. 2
   Camera inspection. We run a camera down the flue to see the interior condition clearly, and we check the crown, flashing, cap, and masonry on the exterior.
3. 3
   Photo report and honest findings. You see the photos and video of what we found, and we tell you plainly when a repair can safely wait.
4. 4
   Written estimate before we start. The estimate itemizes what’s being repaired and with which material, and the final price is set by that written estimate, not a verbal guess.
5. 5
   The repair, then cleanup. We complete the work with the specified material and leave the area as we found it. If you want a sweep along with the repair, that’s the same visit.

How Much Does Chimney Repair Cost in San Angelo?

Our Service Area Near San Angelo

We serve San Angelo and the towns around it, including Grape Creek, Carlsbad, Christoval, Miles, Mertzon, Rowena, Robert Lee, Bronte, and Ballinger. Response times vary by distance and availability, and we’ll give you a realistic window when you book. You can learn more about chimney sweep service and what a standard visit covers. If you’re in San Angelo, Grape Creek, or Carlsbad, call us to confirm availability for your address.

Frequently Asked Questions About Chimney Repair in San Angelo

Schedule Your Chimney Repair Service in San Angelo Today

If something about your chimney concerns you, the estimate is free, and it’s better to know than to wonder. Call (833) 946-3155 to schedule a camera inspection and written estimate. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We show you the photos, tell you honestly when a repair can wait, and won’t recommend work you can’t see the evidence for. Dryer vent cleaning is the other side of the same system, and we handle that too.

Written by the team at Chimney Sweep San Angelo.