Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in San Angelo, TX
Chimney repair in San Angelo is shaped by two things: a short, hard heating season and housing that ranges from early-1900s bungalows near downtown to 1960s-70s ranch homes with masonry fireplaces. Fireplaces here sit idle for months, then burn hot through hunting season, and the masonry around them cracks under West Texas sun, wind and the occasional hard freeze. We work with professional-grade materials, clean the flue, and fix what the camera finds. Call (833) 946-3155 for a free estimate.
Why San Angelo Homes Are Different
The chimney work in San Angelo doesn’t look like the work in greener parts of Texas. This is a semi-arid climate with hot summers, mild winters and persistent wind that pushes dust and grit into open caps and down flues. Chimneys fill with soot faster here, and the windblown debris is real: strong spring winds routinely blow material into caps, and birds nest in flues during the long idle months.
The housing stock splits the work too. Bungalows near downtown and along the Concho River often have original clay-tile flues and exterior chimneys fully exposed to sun and wind, which accelerates masonry cracking and cap deterioration. Ranch homes from the post-war decades tend to have masonry fireplaces with their own settling issues. Newer suburban builds run prefab metal fireplaces with stainless liners, where the conversation is different: cap fit, clearances, and the condition of the liner rather than the brick.
San Angelo’s hard, mineral-rich water matters less to the flue than to the crown, but it does factor in when mortar and concrete are already worn. And because so many fireplaces are lit hard for a few weeks and cold for the rest of the year, creosote has time to harden into a glazed layer that ordinary brushing won’t lift. That’s the single biggest reason a sweep here should end with a camera inspection rather than a handshake.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main San Angelo Services
Two things bring San Angelo homeowners to the phone most often: a fireplace that needs cleaning and a dryer that’s taking too long to dry a load. Both are venting problems, and both are worth handling before the season turns.
Chimney Sweep in San Angelo
A sweep here starts with the flue, not the firebox. Because mesquite and oak burn intense and infrequent through hunting season, the creosote that builds up in a San Angelo chimney is often dense and glazed, and glazed creosote needs more than a light pass with a brush. We sweep the full flue, pull the debris the spring winds blow in, and finish with a camera inspection and a photo report so you can see the interior for yourself rather than take our word for it. The flue, smoke chamber and cap all get checked while we’re up there. Book a chimney sweep before the first cold snap, not after.
Dryer Vent Cleaning in San Angelo
Dryer vents are the venting job most homeowners forget, and the dust in this climate makes them worse. Windblown grit and lint pack into the duct run together, and a clogged vent means longer dry cycles, a hotter dryer, and a fire risk that has nothing to do with the fireplace. We clean the full run from the dryer connection to the exterior hood, clear the lint trap housing, and check the hood flap so it opens and closes properly instead of hanging open for dust and pests. It’s a standalone service, so you don’t need to book chimney work to get it. Schedule dryer vent cleaning and we’ll show you what came out of the line.
Chimney Repair in San Angelo
Most of the chimney repair we see in San Angelo traces back to exposure. Exterior chimneys on the city’s older homes take full West Texas sun on one face and hard freeze on the other, and that cycle cracks mortar joints, spalls brick faces and opens the crown. Add the wind-driven grit that scours caps and the heavy creosote loads from short, intense burn seasons, and a chimney that looked fine in July can leak or smoke by December. Our Chimney Repair work starts with a camera inspection so every recommendation comes with evidence you can look at yourself, and we tell you plainly when a repair can safely wait until spring.
Chimney Cap Installation
Signs you need it
You need a cap if the flue is open to the sky and you’re finding grit, leaves or bird activity in the firebox, or if the current cap is a thin hardware-store model that’s rusted through or blown loose.
What it costs in San Angelo
Chimney cap installation typically runs $150 to $450 in San Angelo, depending on the flue size and the cap style, with the written estimate setting the final price.
How we do it
We measure the flue opening, fit a cap from a professional line such as Gelco or Copperfield, and mount it to the crown with the correct clearances so it vents properly instead of trapping smoke.
Chimney Crown Repair
Signs you need it
A cracked or crumbling crown shows up as brick-colored stains down the chimney’s exterior, water in the firebox after rain, or visible fractures where the crown meets the flue.
What it costs in San Angelo
Chimney crown repair typically runs $300 to $650 in San Angelo, depending on the extent of the cracking and whether the crown can be patched or needs rebuilding, with the final price set by the written estimate.
How we do it
We chip out the failed material, rebuild the crown with a proper slope away from the flue, and seal the joint so water runs off the chimney instead of into the masonry.
What Chimney Repair Costs in San Angelo
| Item | Typical range in San Angelo |
|---|---|
| Chimney cap installation | $150 – $450 |
| Chimney crown repair | $300 – $650 |
| Chimney flashing repair | $250 – $600 |
| Chimney liner installation (stainless) | $2,000 – $5,500 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
Crown and cap work is the most common repair here, and it’s usually the cheapest way to stop water damage before it reaches the flue. Liner work costs more because the material and the labor both climb.
Do I need a new chimney liner in San Angelo?
Not always. A camera inspection decides it. If the flue interior has cracked joints or gaps but the tiles are otherwise sound, HeatShield resurfacing restores the flue at a fraction of full relining. If the liner is deteriorated through, a DuraFlex stainless system is the right call.
Can chimney repair wait until spring in San Angelo?
Sometimes, and we’ll say so. A worn cap can wait a few weeks. An open crown joint before a hard freeze cannot. Water getting into masonry and then freezing is what turns a small repair into a rebuild, so we flag anything that shouldn’t wait.
Brands We Service in San Angelo
We work with a deliberate set of professional-grade brands rather than generic substitutes: DuraFlex flexible liners, HeatShield flue resurfacing compound, and Gelco, Olympia Chimney, Famco and Copperfield caps and covers. That spread lets us fit the right part to an odd-sized or older flue instead of forcing one model onto every chimney. See our brands for what each one is used for, and ask us about turnaround when we quote the job.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in San Angelo, TX
These ranges reflect what the work typically costs in San Angelo. Every job is quoted per job, and the written estimate you receive sets the final price before we start.
| Service | Typical range in San Angelo |
|---|---|
| Chimney sweep (full flue, camera inspection and photo report) | $180 – $350 |
| Dryer vent cleaning | $120 – $250 |
| Chimney cap installation | $150 – $450 |
| Chimney cap replacement | $150 – $450 |
| Chimney crown repair | $300 – $650 |
| Chimney flashing repair | $250 – $600 |
| HeatShield flue resurfacing | $1,200 – $3,000 |
| Chimney liner installation (stainless) | $2,000 – $5,500 |
Two things push price up in San Angelo: the height and access of exterior chimneys on older homes, and whether the flue needs resurfacing or full relining rather than a straight sweep. The estimate is free, and nothing gets added after the fact – if the camera shows something we didn’t expect, you hear about it before any work continues.
Neighborhoods We Serve in San Angelo
We work across San Angelo, from the older blocks near downtown and along the Concho River out to the suburban builds on the city’s edges. The work differs block to block – clay-tile flues and worn crowns on the older homes, stainless liners and cap fit on the newer ones – and we bring the materials for both. Dispatch runs 7am to 7pm, Sunday through Friday, and we book by area so the schedule stays tight.
- Downtown San Angelo and the surrounding historic blocks
- The Concho River corridor
- Older ranch-home neighborhoods from the post-war decades
- Suburban builds on the city’s outer edges
- Lake Nasworthy area homes
Service Area – Cities Near San Angelo
San Angelo sits at the center of a wide, sparsely settled stretch of West Texas, and we cover the smaller towns around it. If you’re outside the city, the same short-burn-season pattern applies: fireplaces that sit cold for months and then get worked hard, with cap and crown damage from wind and sun. We book those calls the same way we book San Angelo work. Towns we serve include Christoval, TX, Carlsbad, TX, Miles, TX, and Mertzon, TX.
Serving San Angelo, TX – Our Local Coverage Area
We serve San Angelo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in San Angelo
Sweeps and repairs are booked, not dispatched on demand, and we schedule by area through the week. Call (833) 946-3155 to get on the calendar. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. A call outside dispatch hours is booked into the next opening.
Some do, some don’t. Structural masonry work and full relining usually require one, while a cap or crown repair typically doesn’t. Most cities require a permit for structural chimney work, so ask San Angelo’s building department before the job starts. We’ll tell you what category your repair falls into when we quote it.
Yes. We work the smaller communities around San Angelo, including Christoval, Carlsbad, Miles and Mertzon, and the venting problems out there are the same ones we see in the city. Book the call the same way and we’ll confirm the address when we schedule.
If your fireplace is due for a sweep, your crown is cracking, or your dryer is taking two cycles to finish a load, call (833) 946-3155 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Every job is quoted upfront from a written estimate, and nothing gets recommended without camera evidence you can see for yourself. To reach our main office, visit Chimney Sweep San Angelo.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Angelo Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Tyrone Hampton"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
- Marisol Vargas"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
- Rafael Morales